AutoCAD Exam Test – CAD Training Institute

#1. What does WCS stand for?

c) Wrong CAD setting

a) World Coordinate System

d) World coordinate software

b) World CAD System

#2. PL short cut command use for?

4) perpendicular line

1) Polyline

2) Line

3) verticle line

#3. What is the full form of PCC?

3) Reinforce Cement Concert

1) Plain Cement Concrete

2) Planning Concrete Cement

4) None of them

#4. AutoCAD is developed and by….

b. Intel corp.

a. AutoCAD

d. Autodesk

c. Microsoft

#5. How to Erase an Object?

2) By using trim

1) By selecting off Erase option.

4) First & Third is True

3) CTRL + A then Delete Button

#6. PO shortcut key use for Pooler Array

A. True

B. False

#7. Array, Copy, Mirror, Move are the options of

a) Tool

d) Draw

c) Dimensions

a) Modify

#8. What is the of F1 in Auto cad

b) for SNAP

d) for GRID

a) for HELP

c) for Ortho

#9. When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.

d. Read the coordinate position on the Dynamic Readout

a. pull the line from away from the starting point very carefully

b. insure that Ortho is on

c. enter 3 for the length of the line

#10. Press the F8 key of the keyboard for :

D. Osnap On/off

A. Grid on/off

B. Grid on /off

C. Ortho on / off

#11. Arc is used to draw a circle.

2) false

1) True

#12. AutoCAD is a computer-aided design (CAD) program used for 2-D and 3-D design and drafting.

a) True

b) False

#13. When drawing in 2D, what axis do you NOT work

Y

3D

Z

X

#14. How can you Draw a Perfect Circle in AutoCad 2D?

d) By Command Polygon

b) Using Arc

a) By Command Circle

c) Three Point Arc

#15. What is the meaning of ucs in autocad?

3) user command support

4) user coordinate system

1) User command system

2) User computer System

#16. MA MATCHPROP User for Applies the properties of a selected object to other objects.

A. Ture

B. False

#17. How many points do you need to define for the rectangle command?

2) Three

1) Two

4) One

3) Four

#18. One quick way to view the entire drawing area is to use the Zoom command by typing ________.

c. type SHOWALL enter

b. type Z enter E enter

a. type Z enter A enter

d. type ALL enter

#19. Creates a smooth curve that passes through or near specified points.

c. Polyline

d. multiline

b. SCALE

a. SPLINE

#20. How to set Primary Units.

b) DIMSTYLE_Modify_Text

d) All of above

c) DIMSTYLE_Modify_Alternate Units

a) DIMSTYLE __modify Primary Units.

#21. LAYER Command can Manages layers and layer properties show and Hide object.

a. True

b. False

#22. When you explode a block, the geometry returns to its original properties.

a) True

b) False

#23. What happens if you fillet these two lines with radius 0

d) No Effect

c) Circular Corner

a) Round Corner

b) sharp corner

#24. Construction line command for vertical ?

3) XL Space V Enter

1) All of the above

1) XL Enter V Enter

2) XL Space V Space

#25. What is the full form of CAD?

3) Computer Aided Design

4) Cad Auto Design

1) Computers Advanced Design

2) Automated Design

#26. Press the F9 key of the keyboard for :

b. Snap on /off

a. Grid on/off

d. Osnap On/off

c. Ortho on / off

#27. Construction line command for Horizontal?

4) None of these

3) XL Enter H Enter

2) XL Enter V Enter

1) XL Enter HO Enter

#28. CTRL+SHIFT+S this command use for?

B. Save

C. MENU

A. Save as.

D. Delete

#29. What is the full form of RCC ?

4) All of these

2) Reinforced Cement Concrete

1) Rocks Concrete Cement

3) Reinfo Cement Concrete

#30. OS Shortcut is user for

4) All of the above

1) Object Snap

3) object system

2) operating system

#31. Creates a region or a polyline from an enclosed area.

S. Block

Q. Area

P. Polyline

R. Boundary

#32. The origin of a drawing is at:

C. 2,2

B. 0,0

A. 4,2

D. 0,1

#33. ARRAY Cannot Creates multiple copies of objects in a pattern.

b. False

a. True

#34. EX shortcut command use for Explode?

5) False

6) True

#35. Witch Command can Moves objects a specified distance in a specified direction.

d. Move

c. Copy

b. Array

a. Print

#36. Which keystroke will UNDO a command ?

4) Shift+U

2) Control+Z

1) Control+Y

3) Control+X

#37. Shortcut key for Rotates an objects around a base point.

b. RO

c. RT

d. TR

a. PO

#38. Which one of these will NOT start the Print command?

c) Print

a) Pressing PLOT

d) Pressing Alt + P

b) Control + P

#39. By using ARC command also draw an ARC with 2 points.

a) False

b) TRUE

#40. Which mode allows user to draw 90 degree straight lines.

A. Osnap

C. Linear

D. Polar tracking

B. Ortho

#41. Witch Command use for Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill

2) Dimantion

3) Hatch

4) Create Similar

1) Match

#42. What is the full form of auto-cad?

D. Cad Auto Design

C. Automated Design

B. Computers Advanced Design

A. Automated Computer Aided Design (AUTO CAD)

#43. Scaling objects makes them…

d) Only for Smaller

b) Bigger

a) Smaller

c) Both Bigger and Smaller

#44. Witch key use For Cancel current command

A. Delete

B. Backspace

D. None of them

C. Esc

#45. AREA Command for Calculates the area and perimeter of objects or of defined areas.

A. True

B. False

#46. Types of Array in Auto cad?

5

1

2

3

#47. JOIN For Joins similar objects to form a single, unbroken object.

A. True

B. False

#48. Which command creates a new object parallel to the original object?

a. Mirror Command

b. Offset command.

c. Mirror with coppy.

a. copy command

Wrong answer

#49. for Creates concentric circles, parallel lines, and parallel curves.

c. Scale

a. Move

d. Line

b. Offset

Results

Congratulation your are Successful Passed exam

Sorry your are Fail Please try Again

#1. What does WCS stand for?

#2. PL short cut command use for?

#3. What is the full form of PCC?

#4. AutoCAD is developed and by….

#5. How to Erase an Object?

#6. PO shortcut key use for Pooler Array

#7. Array, Copy, Mirror, Move are the options of

#8. What is the of F1 in Auto cad

#9. When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.

#10. Press the F8 key of the keyboard for :

#11. Arc is used to draw a circle.

#12. AutoCAD is a computer-aided design (CAD) program used for 2-D and 3-D design and drafting.

#13. When drawing in 2D, what axis do you NOT work

#14. How can you Draw a Perfect Circle in AutoCad 2D?

#15. What is the meaning of ucs in autocad?

#16. MA MATCHPROP User for Applies the properties of a selected object to other objects.

#17. How many points do you need to define for the rectangle command?

#18. One quick way to view the entire drawing area is to use the Zoom command by typing ________.

#19. Creates a smooth curve that passes through or near specified points.

#20. How to set Primary Units.

#21. LAYER Command can Manages layers and layer properties show and Hide object.

#22. When you explode a block, the geometry returns to its original properties.

#23. What happens if you fillet these two lines with radius 0

#24. Construction line command for vertical ?

#25. What is the full form of CAD?

#26. Press the F9 key of the keyboard for :

#27. Construction line command for Horizontal?

#28. CTRL+SHIFT+S this command use for?

#29. What is the full form of RCC ?

#30. OS Shortcut is user for

#31. Creates a region or a polyline from an enclosed area.

#32. The origin of a drawing is at:

#33. ARRAY Cannot Creates multiple copies of objects in a pattern.

#34. EX shortcut command use for Explode?

#35. Witch Command can Moves objects a specified distance in a specified direction.

#36. Which keystroke will UNDO a command ?

#37. Shortcut key for Rotates an objects around a base point.

#38. Which one of these will NOT start the Print command?

#39. By using ARC command also draw an ARC with 2 points.

#40. Which mode allows user to draw 90 degree straight lines.

#41. Witch Command use for Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill

#42. What is the full form of auto-cad?

#43. Scaling objects makes them…

#44. Witch key use For Cancel current command

#45. AREA Command for Calculates the area and perimeter of objects or of defined areas.

#46. Types of Array in Auto cad?

#47. JOIN For Joins similar objects to form a single, unbroken object.

#48. Which command creates a new object parallel to the original object?

#49. for Creates concentric circles, parallel lines, and parallel curves.

Contact Form

Testimonials

About Us

Practice Areas

Office Hours